Nephelometry and Turbidimetry: Measuring Suspended Particulates by Light Scattering

Protocol · Light scattering · Turbidity · Calibration · Immunoassays

Published 2026 · Last updated 2026-09-28 · Hailu Zhou

A nephelometer measures the concentration of suspended particulates in a liquid or gas colloid by detecting light that the particles scatter, rather than the light that passes straight through them. A light source illuminates the sample and a detector sits to one side of the beam — most often at 90° to the incident light. The measured signal is then a function of the light scattered into that detector, so particle density is inferred from scattered intensity. To some extent the amount of light a given particle density scatters depends on the particles themselves — their size, shape, colour, and reflectivity — which is why nephelometers are calibrated against a particle of known properties and why the same suspension can read differently on instruments with different optics.

Nephelometry versus turbidimetry

Nephelometry and turbidimetry are two sides of the same measurement. A nephelometer measures the light scattered at an angle (commonly 90°) to the incident beam; the signal rises as turbidity rises. A turbidimeter measures the light transmitted through the sample at 0°; the signal falls as turbidity rises, because particles attenuate the beam. The two are complementary: side-scatter nephelometry is more sensitive at low turbidity (little transmitted light is lost, but even faint scatter is detectable off-axis), while transmitted-light turbidimetry is convenient at higher turbidity where scatter is strong. In everyday water-quality testing the instrument is often simply called a turbidimeter, but the optics differ, and a nephelometric turbidimeter always monitors light reflected off the particles, not attenuation.

What the technique measures

Instrument and calibration

Because scattered light depends on particle optical properties, a stable synthetic material with a uniform particle size — formazin, first used to standardise turbidity measurements in 1926 — is the conventional calibration standard. Formazin is a white polymer suspension that can be prepared reproducibly and diluted to a series of reference points; the resulting unit is the Formazin Turbidity Unit (FTU). Several named units are special cases of FTU:

Other historical or industry units exist (EBC turbidity units for brewing, Jackson "Candle" units, Helms units, ppm of diatomaceous earth, the German TE/F), but the most generally applicable is FTU. A crucial caveat: different measurement methods can give quite different values even when reported in the same unit, because the geometry, wavelength, and particle-size sensitivity differ between instruments.

Procedure

  1. Power the instrument and allow the source to warm up and stabilise (typically 15–30 min) so baseline drift does not bias low readings.
  2. Calibrate with formazin standards spanning the working range; record the standard lot and preparation date. Re-verify against a primary standard at intervals because formazin ages.
  3. Use a clean, scratch-free, matched cuvette or flow cell. Dust, fingerprints, and bubbles all scatter light and are the most common source of erroneous readings.
  4. Rinse the cuvette with sample, then fill to the mark and gently invert; let standing bubbles clear before reading.
  5. Measure the scattered intensity at the defined angle. For samples outside the calibration curve, dilute with particle-free diluent and multiply the result by the dilution factor.
  6. For gas-phase or aerosol instruments, pass the air stream through a zero (particle-free) filter to establish the baseline, and apply sheath air to keep the optical chamber clean.
  7. Record raw signal, unit, geometry, wavelength, and any dilution so the result can be compared across instruments.

Sheath air in aerosol nephelometry

In gas-phase instruments, sheath air is clean filtered air that surrounds the aerosol stream so particles do not circulate or deposit inside the optic chamber. Sheath air prevents contamination from build-up and deposits, improves response time by containing the sample in the measurement zone, and simplifies maintenance by keeping the optics clean. The instrument generates sheath air by passing air through a zero filter before the sample path begins.

Applications

The main uses of nephelometers are air-quality measurement for pollution monitoring, climate monitoring, and visibility. Airborne particles are commonly grouped as biological contaminants (mould, fungi, bacteria, viruses, dander, dust mites, pollen), particulate contaminants, gaseous contaminants, or dust; the size and type of particle determine its measurement and its health significance. In climate studies, three-wavelength nephelometers fitted with a backscatter shutter help determine the solar radiation reflected back into space by dust and particulate matter, part of the global radiation balance. In water treatment, nephelometric turbidity is a routine regulatory parameter for raw and finished water. In medicine, nephelometry measures immune function and quantifies specific serum proteins by the light scattered from antigen–antibody complexes — a mainstay of clinical immunochemistry.

Limitations and troubleshooting

References

  1. Helman EZ, Blevins EJ, Gleason IR, et al. Evaluation of light-scattering index (nephelometry) for assessing serum triglycerides and lipoproteins. Clin Chem. 1971;17(10):988–991. doi:10.1093/clinchem/17.10.988
  2. Lizana J, Eneroth P, Byström K. Immunonephelometry of specific proteins in human seminal plasma. Clin Chem. 1983;29(4):618–623. doi:10.1093/clinchem/29.4.618
  3. Malvy DJ, Povéda JD, Preziosi P, et al. Laser immunonephelometry reference intervals for eight serum proteins in healthy children. Clin Chem. 1992;38(3):394–399. doi:10.1093/clinchem/38.3.394
  4. Murray DL, Ryu E, Snyder MR, Katzmann JA. Quantitation of serum monoclonal proteins: relationship between agarose gel electrophoresis and immunonephelometry. Clin Chem. 2009;55(8):1523–1529. doi:10.1373/clinchem.2009.124461
  5. Thorne RSW. Application of formazin standards to nephelometric estimation of beer turbidity. J Inst Brew. 1961;67(3):191–199. doi:10.1002/j.2050-0416.1961.tb01779.x
  6. Horvath H. On the applicability of the Koschmieder visibility formula. Atmos Environ. 1971;5(3):177–184. doi:10.1016/0004-6981(71)90081-3
  7. Horvath H, Noll KE. The relationship between atmospheric light scattering coefficient and visibility. Atmos Environ. 1969;3(5):543–550. doi:10.1016/0004-6981(69)90044-4
  8. Griffing GW. Relations between the prevailing visibility, nephelometer scattering coefficient and sunphotometer turbidity coefficient. Atmos Environ. 1980;14(5):577–584. doi:10.1016/0004-6981(80)90089-x
  9. Lodge JP Jr, ed. Integrating nephelometer measurement of scattering coefficient and fine particle concentrations. In: Methods of Air Sampling and Analysis. 3rd ed. Boca Raton: CRC Press; 2017:450–457. doi:10.1201/9780203747407-81