Immunofluorescence and Fluorescent Microscopy: Getting Colocalisation Right

Fixation and permeabilisation · Antibody choice · Pearson and Manders coefficients · SIM/STORM · Quantification pitfalls

Published 2026 · Last updated 2026-09-27 · Hailu Zhou

Immunofluorescence produces the most persuasive images in biology and the least reproducible numbers. A beautiful two-colour merge is easy to make and hard to defend, because "the channels overlap" is a claim about pixels, not about molecules. The diffraction limit means two objects 200 nm apart are rendered as one; the detector clips bright pixels; and the choice of threshold silently determines the colocalisation statistic. This post walks through the sample preparation that constrains what is possible, then the analysis that decides what you may claim.

Fixation, permeabilisation, and blocking

Fixation must preserve both the antigen and the architecture. Paraformaldehyde (4%, freshly prepared from powder or sealed ampoules — never from a stale opened bottle) crosslinks proteins and preserves morphology; methanol at −20 °C precipitates proteins and permeabilises simultaneously, which is convenient for cytoskeletal and nuclear antigens but destroys many membrane proteins and some phosphoepitopes.

Permeabilisation follows fixation for intracellular targets. Triton X-100 (0.1–0.5%) is a harsh, effective non-ionic detergent; saponin is milder and reversible; digitonin selectively permeabilises cholesterol-rich membranes, which is useful for distinguishing cytosolic from organellar pools. Over-permeabilisation produces artefacts that look like real signal — extracted nuclear proteins, disrupted membrane staining — so the concentration should be the lowest that gives uniform access.

Blocking reduces nonspecific antibody binding. The standard is 1–5% bovine serum albumin or normal serum from the species in which the secondary was raised, plus 0.1% Tween. Normal serum blocking works because it saturates Fc receptors; for Fc-receptor-rich cells such as macrophages, an Fc block is advisable. Blocking and antibody incubation buffers should be matched, and the whole protocol should be run on ice or at room temperature for phospho-targets to limit phosphatase activity.

Choosing the primary and secondary antibodies

Primary antibody quality dominates everything. Validate specificity by knockdown or knockout when the antibody is new, and prefer recombinant monoclonal antibodies over polyclonal ascites for reproducibility. Check the host species, whether the antibody recognises a fixed epitope, and whether it is raised against a peptide that is masked after crosslinking.

The secondary should be highly cross-adsorbed to minimise species cross-reactivity, and chosen for subspecies-specific detection if two primaries share a host. Conjugation to a fluorophore is a trade-off between brightness and photostability: Alexa Fluor 488 and 568 are workhorses; Cy3 and Cy5 are bright but prone to cross-talk with other channels.

Acquisition parameters set the floor

Confocal microscopy removes out-of-focus light and improves effective resolution to roughly 180 nm laterally, 500 nm axially. Spinning-disk systems trade some resolution for speed and lower phototoxicity, which matters for live cells. Airyscan and other detector-array techniques give ~120–140 nm lateral resolution on a standard confocal, often enough to separate close structures without moving to a dedicated super-resolution platform.

The acquisition rules that prevent later disaster: keep pixel size at or below the Nyquist limit (roughly half the optical resolution), set excitation low enough that the brightest regions do not saturate, never use a look-up table that clips, and acquire a matched, untreated control on the same session with identical settings. Any comparison across images is invalid the moment gain, laser power, or offset changes between them.

Colocalisation statistics: Pearson, Manders, and why they disagree

Colocalisation analysis is the most abused quantitative step in cell imaging. The standard measures:

The pitfalls are consistent across labs. Thresholding determines whether a pixel counts as signal, so the threshold rule must be stated and applied identically to all images, ideally via an automatic method (Costes, Otsu, Li) rather than manual adjustment. Bleed-through between channels inflates colocalisation; it must be measured with single-stained controls and corrected with a linear unmixing matrix. And a correlation between two channels does not establish physical interaction or even proximity at the molecular scale — the resolution of the measurement (200 nm) is far coarser than the interaction distance (nm). Demonstrating molecular proximity requires FRET, proximity ligation, or super-resolution with a validated ruler.

A defensible result reports at least two colocalisation measures, the threshold method, the number of cells and images, and a control where the two markers are known to be separate. Where possible, cross-validate with a non-imaging method, such as co-immunoprecipitation, that probes the same claim.

Super-resolution: SIM, STORM, and STED in one paragraph each

Structured illumination microscopy (SIM) projects a patterned light grid and reconstructs a resolution roughly twice the diffraction limit (~100 nm laterally) from the moiré fringes. It is live-cell compatible and multi-channel, but the reconstruction algorithm can generate artefacts, and it places heavy demands on sample quality and the reconstruction code.

STORM and PALM localise individual photoswitchable fluorophores over thousands of frames and build a pointillist image with 20–30 nm lateral resolution. They require sparse activation, long acquisitions, and specialised buffers; live-cell imaging is possible with faster variants but phototoxicity becomes limiting.

STED achieves ~30–50 nm resolution by depleting the periphery of the excitation spot with a doughnut-shaped laser. It is fast and works on conventional fluorophores, but requires high laser power and is photodamaging. All three change the meaning of "colocalisation": at 20 nm, overlap becomes a statement close to contact, so the analysis should use spatial statistics (nearest-neighbour distance, Ripley's K, cluster analysis) rather than Pearson coefficients.

References

  1. Harlow E, Lane D. Using Antibodies: A Laboratory Manual. Cold Spring Harbor: Cold Spring Harbor Laboratory Press; 1999.
  2. Manders EMM, Verbeek FJ, Aten JA. Measurement of co-localization of objects in dual-colour confocal images. J Microsc. 1993;169(3):375–382.
  3. Costes SV, Daelemans D, Cho EH, et al. Automatic and quantitative measurement of protein-protein colocalization in live cells. Biophys J. 2004;86(6):3993–4003.
  4. Bolte S, Cordelières FP. A guided tour into subcellular colocalization analysis in light microscopy. J Microsc. 2006;224(Pt 3):213–232.
  5. Dunn KW, Kamocka MM, McDonald JH. A practical guide to evaluating colocalization in biological microscopy. Am J Physiol Cell Physiol. 2011;300(4):C723–C742.
  6. Gustafsson MG. Surpassing the lateral resolution limit by a factor of two using structured illumination microscopy. J Microsc. 2000;198(Pt 2):82–87.
  7. Rust MJ, Bates M, Zhuang X. Sub-diffraction-limit imaging by stochastic optical reconstruction microscopy (STORM). Nat Methods. 2006;3(10):793–795.
  8. Betzig E, Patterson GH, Sougrat R, et al. Imaging intracellular fluorescent proteins at nanometer resolution. Science. 2006;313(5793):1642–1645.
  9. Hell SW, Wichmann J. Breaking the diffraction resolution limit by stimulated emission: stimulated-emission-depletion fluorescence microscopy. Opt Lett. 1994;19(11):780–782.
  10. Sahl SJ, Hell SW, Jakobs S. Fluorescence nanoscopy in cell biology. Nat Rev Mol Cell Biol. 2017;18(11):685–701.